Filter By Category
Categories
Abrasives, Cutting, HolemakingAbrasives, Cutting, Holemaking
Battery ProductsBattery Products
Fittings, Valves, AdaptersFittings, Valves, Adapters
Securing, BundlingSecuring, Bundling
StorageStorage
TerminalsTerminals
ToolsTools
Trailer ProductsTrailer Products
Truck, Warning LightsTruck, Warning Lights
Wire, Cable, HoseWire, Cable, Hose
MiscMisc
trigger
Carbide Hole Cutter with Spring 1 inch (25 mm) cutting diameter
Part #: LE-16CHC
This hole cutter is designed with a precision-ground carbide cutting edge, optimized for fast and clean cutting through tough materials. It includes an integrated spring-loaded ejector for automatic slug removal, improving productivity by minimizing downtime between cuts. The cutter has a pilot drill for centering and is intended for repetitive hole cutting with high durability.
Similar Products

Bi-Metal Band Saw Blade (Diemaster 2 Welded-to-Length) 5 ft 5 inches x 1/2 inch x 0.025 inch (1651 mm x 12.7 mm x 0.635 mm)
Part #: LE-27848D2B51650

Bi-Metal Band Saw Blade (Diemaster 2 Welded-to-Length) 5 ft 2 inches x 3/8 inch x 0.025 inch (1575 mm x 9.5 mm x 0.635 mm)
Part #: LE-69381D2B51575

” Bi-Metal Hacksaw Blade 12″” x 1/2″” x 0.023″” (300 mm x 13 mm x 0.6 mm”
Part #: HSB3-14

T-Shank Jig Saw Blade (4-Inch, 10 TPI, 2-Pack) 4 inches (blade length) x 3/8 inch (blade width) x 0.05 inch (blade thickness)
Part #: LE-J410S

Bi-Metal Hacksaw Blade 12″ x 1/2″ x 0.023″ (300 mm x 13 mm x 0.6 mm)
Part #: HSB3-18

